Hydraulic Station 330V 600V 80% Servo Energy Saving System

15 years of professional reform experience create brilliant in market

After the original hydraulic control system is reformed, because of its closed-loop control and high control accuracy, it can completely solve the shortcomings of traditional technology, and has been successfully applied to production practice

1. Description of Hydraulic statation

The hydraulic station is an independent hydraulic device. It supplies oil according to the requirements of the main engine, and controls the direction, pressure and flow of the oil flow. It is suitable for various hydraulic machinery where the main engine and the hydraulic device can be separated

The motor drives the oil pump to rotate. The pump sucks oil from the oil pump and pumps oil. The mechanical energy is converted into the pressure energy of the hydraulic oil. The hydraulic oil is adjusted by the hydraulic valve through the manifold block (or valve combination), and then transmitted to the oil cylinder or oil horse of the hydraulic machinery through the external pipeline, so as to control the direction change of the hydraulic motor, the size of the force and the speed of the speed, so as to promote the hydraulic engine This kind of hydraulic machinery does work.

2. Hydraulic stations for energy saving in iron and steel industry

2.1) Hydraulic system of blast furnace hot blast stove

2.2) Hydraulic system of blast furnace top

2.3) Hydraulic system in front of blast furnace

2.4) Hydraulic system of billet caster

2.5) Hydraulic system of slab caster

2.6) Electric furnace liquid / refining furnace pressure system

2.7) Hydraulic system of walking beam furnace

2.8) Hydraulic system of rod and wire rod

2.9) Hydraulic system of hot rolling plate

2.10) Hydraulic system of cold rolled sheet

2.11) Hydraulic system of cold rolling and pickling line

2.12) Cold rolling packaging line hydraulic system

3. Servo system Advantage

3.1) Super energy saving: energy saving rate 45%-80%

3.2) Super stability: Widely speed rang and strong overload capacity

3.3) Excellent voltage range: 330V-600V

3.4) Both have motor KTY and PTC overheating protection function

3.5) Many additional green values: Extend the using life, Low noise, Reduce the use of cooling water

3.6) We supply the whole completed servo system:Including servo driver, servo motor, SUMITOMO gear pump, electric cabinet, electric resistance, pressure sensor, magnet ring, press-flow shields semaphore wire, power cable, oil flange, oil suction pipe, semaphore converts board, U-steel and so on

4. Servo system Specification

80% Servo Energy Saving System

330V Servo Energy Saving System

600V Servo Energy Saving System

Hydraulic Station 330V 600V 80% Servo Energy Saving System Images